3D MODEL DESCRIPTION &nbsp;If you want to celebrate but still be discreet, these are the models for you. &nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time Based on&nbsp;Ender 3: 01 Hours 51 Minutes (will vary accord to you printer model)</li><li>Approximately Length: 5 cm</li></ul>&nbsp;3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>First Layer Line Width:&nbsp;0.48 mm / 120%</li><li>Average Speed:&nbsp;20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)</li><li>Recommended Initial Layer Height:&nbsp; 0.16 mm</li><li>Recommended Layer Height:&nbsp; 0.16 mm</li><li>Recommended Perimeters/ Walls:&nbsp;3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support:&nbsp;No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!

St Patricks Keychains