3D MODEL DESCRIPTION
Delicate patterns that celebrate the season's beauty, carved with love. Choose between bunnies or blossoms.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 1 Dau 22 Hours 03 Minutes (will vary accord to you printer model)
- Approximately Height: 15 cm
Tips and Tricks: You can program the color change per layer, in internal objects, to bring more color to your Easter Eggs.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, Brim (inside and outside) in the “shell” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
