3D MODEL DESCRIPTION
There’s not a nervous bone in his body, yet he’s always a bit prickly. Don’t let him intimidate you, though – he is a friendly multicolor print. Use warm water to shape his quills into being more or less pricklier.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 09 Hours and 33 Minutes
- Approximately Length : 13cm
- Remember to activate Print/ Detect Thin Walls option on your slicer of choice.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!