Spellbound Rest - Headphone Holder

3D MODEL DESCRIPTION
 

Your headphones deserve a proper resting place. This stand keeps them safe, steady, and under a mild enchantment.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 07 Hours 43 Minutes*  (may vary according to your printer model)
• Approximately Height: 18 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

Note: We do not recommend using SILK filaments for this piece. The piece contains fittings and requires some resistance, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-type filament is at your discretion.

ATTENTION:  requires super glue.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Honeycomb)
• Needs Support: No.
• Build Plate Adhesion: Brim.
• Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!