3D MODEL DESCRIPTION
You guys loved it, so we made another one! This spaceship door portal is as mysterious as it's easy to print. Completely support free, this phone holder has three sizes so it fits your phone guaranteed.
- This STL file is recommended for FDM Printers!
- 3D Printing Time 14 Hours and 32Minutes
- Approximately Dimensions: 7 inches: 18cm x 12.5cm x 6cm
6 inches: 16cm x 11cm x 5cm
5 inches: 14.5cm x 10cm x 4.5cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 60mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!