3D MODEL DESCRIPTION
All that gold, all that glory. This box keeps your deck in check and puts your Commander on display like the royalty they are.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours, 27 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
- Approximately Height: 14x11x06 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This model has a built-in magnet slot, and to insert it, a “Print Pause” must be scheduled at the corresponding layer. Important: If your nozzle is metal, it may attract the magnet. A drop of “Super Glue” might be necessary.
You Will Need: 2x Neodymium Magnet - 6x3 - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 10% (Grid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Painted Brim)
- Others: This model has “Pre-Supports” that should be removed after printing is complete.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!