3D MODEL DESCRIPTION
A wall plaque with a curious cat peeking from the corner and a hidden key compartment built right in. Decorative on the outside, practical on the inside.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 01 Day, 06 Hours 10 Minutes* - 615 g of filament (may vary according to your printer model)
- Multicolor - 01 Day, 08 Hours 34 Minutes* - 652 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 03 colors)
- Multipart - 01 Day, 06 Hours 43 Minutes* - 618 g of filament (may vary according to your printer model)
- Approximately Height: 29 x 14,5 x 05 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
Note: You can use a string to hang this item.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 20 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (normal (manual)).
- Build Plate Adhesion: Yes (outer brim).
- Others: Use (Brim) and (Manual Support) only on the "Cover" and "Box" files of each type.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
