3D MODEL DESCRIPTION
That smile means it knows something you don't. Click it, shake it, hold it, and wonder what it's so happy about.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Small - 05 Hours, 22 Minutes* (may vary according to your printer model)
Monocolor Big - 01 Day, 01 Hours, 37 Minutes* (may vary according to your printer model)
Multicolor Small - 10 Hours, 34 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors)
Multicolor Big - 01 Day, 06 Hours, 52 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximately Height: Small - 06 cm / Big - 10 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You Will Need: Led 3V - 1x - Amazon - AliExpress - Mercado Livre
Clicker Switch - 1x - Amazon - AliExpress - Mercado Livre
Lithium Battery 1220 - 1x - Amazon - Aliexpress - Mercado Livre
Rings Key Chain - 1x - Amazon - Aliexpress - Mercado Livre
Rings Connector - 1x - Amazon - Aliexpress - Mercado Livre
ATTENTION: This files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Painted Grid) only in “Body” and “Basket Up/Up Keychain” files.
- Build Plate Adhesion: No.
- Others:You will need to apply supports only to the internal bridge of the “Body” file and the top and bottom “Basket” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
