3D MODEL DESCRIPTION
If punching could glow, it would look like this.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 11 Hours, 52 Minutes* (may vary according to you printer model)
- Approximately Measurements: 20 x 21 x 8,5 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need:
LED Candle: Mercado Livre - Amazon - Aliexpress
RGB LED Board: Amazon - Aliexpress
ATTENTION: the “Diffuser” file requires super glue and specific settings. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3 (for “Diffuser” part use 2 walls).
- Recommended Infill (%): 5% (Gyroid). For “Diffuser” part use 0%.
- Needs Support: Yes. (Tree)
- Build Plate Adhesion: Yes. (Brim) only in “Diffuser” files.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!