3D MODEL DESCRIPTION
He’s got a lot on his mind, but he’s too headstrong to share!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 1 Day, 18 Hours, 12 Minutes (will vary accord to you printer model)
- Approximately Height: 15 cm
- You need to use Neodymium Magnets - 6x2mm: AliExpress
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim, only “front file”
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!