3D MODEL DESCRIPTION
Part wolf, part nightmare, all attitude. This werewolf-suited skull buddy pulls off a permanent scowl that somehow still manages to be adorable. The limb joint mechanic makes every interaction feel alive.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 08 Hours 08 Minutes* (may vary according to your printer model)
Multiparts - 09 Hours 07 Minutes* (may vary according to your printer model)
Multicolor - 18 Hours 06 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximately Height: 10 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: files requires super glue.
YOU WILL NEED:
Split Key Ring with Chain - Amazon - AliExpress - Mercado Livre
12 mm Ring Connector - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Manual normal support.
- Build Plate Adhesion: Yes. Brim ears
- Others: To print the chains, paint the brim ears only at the ends.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!