3D MODEL DESCRIPTION&nbsp;Don't worry, they're not actually skeletons, it's just a pretty costume.&nbsp; &nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time:&nbsp; Cat - 06 Hours 44 Minutes &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Dog - 13 Hours 06 Minutes</li><li>Approximately Height: Cat - 9,5 cm &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Dog - 11,5 cm</li></ul> 3D TECHNICAL OVERVIEW&nbsp;<a href="https://youtu.be/mZroEPBG2As" target="_blank" rel="noopener noreferrer">https://youtu.be/mZroEPBG2As</a>&nbsp;3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>Average Speed:&nbsp;20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)</li><li>Recommended Initial Layer Height:&nbsp;&nbsp;0.12 mm</li><li>Recommended Layer Height:&nbsp;&nbsp;0.12 mm</li><li>Recommended Perimeters/ Walls: 3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support: No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. &nbsp;Happy Printing!

Skeleton Pet Figurines