3D MODEL DESCRIPTION
A vending machine with open display shelves so the prizes are always visible. Turn the crank, pick your reward, feel like a kid again.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Showcase Display Multiparts - 01 Day 03 Hours 00 Minutes* (may vary according to your printer model)
Showcase Hidden Surprise Multiparts - 23 Hours 08 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): 18 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You will need;
Candle LED: Amazon - Aliexpress - Mercado Livre (You need to remove the candle top cap.)
Orthodontic Elastics 3/8 Heavy: Amazon - Aliexpress - Mercado Livre
Plastic Capsule Toy 2'' - Amazon - Aliexpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Ear Brim, to avoid warp.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!