3D MODEL DESCRIPTION
Four legs and a double cannon on top make this one the tank of the squad. Assemble it from scratch and you have a war machine that looks like it means serious business.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 16 Hours 10 Minutes* (may vary according to your printer model)
Multicolor - 01 Day 7 Hours 21 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately dimensions (assembled): 15cm x 20cm x 13cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: If you prefer can glue some multipart pieces, but it's not strictly necessary. It's possible to build the robot without glue.
Note: We do not recommend the use of SILK filaments for this piece. The piece contains fittings and joints, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-type filament is at your discretion.
Warning: Be careful when tightening the screws. Excessive force will break the screw. Remember it's a 3D printed piece.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Brim, only in the “Turret Guns” files.
- Others: For the "screw" part, use the parameters below. These parameters improve strength.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 15% (Gyroid).
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!