3D MODEL DESCRIPTION
A wrecked ship that sets the mood before anyone rolls a die. Perfect for coastal encounters, cursed harbors, or any scene that needs a story told in broken wood and rust.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 09 Hours, 47 Minutes* (may vary according to your printer model)
Multiparts - 10 Hours, 35 Minutes* (may vary according to your printer model)
Multicolor - 22 Hours, 06 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 11 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim) only in “Grid” files.
- Others: For a better finish, use a more precise profile optimized for the smaller perimeters of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!