3D MODEL DESCRIPTION
A quiet glow that feels pulled from somewhere deeper. Soft light, strong presence, impossible to ignore.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 09 Hours, 11 Minutes* (may vary according to your printer model)
Multicolor - 01 Day, 03 Hours, 21 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 22 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
Use a power cord and plug of your choice, a light bulb, and a light socket at the links below.
You Will Need: Socket G9 - Amazon - AliExpress - Mercado Livre
Led G9 - Amazon - AliExpress - Mercado Livre
Bambu LED Kit - Bambu Store - Amazon - Aliexpress
Candle LED - Amazon - Mercado Livre - Aliexpress (Remove the top part of the tea light use only the base that contains the LED and batteries.)
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Grid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Painted Brim)
- Others: In the “Lens Multipart” files, use the (Vase Mode).
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!