3D MODEL DESCRIPTION
A decorative miniature door facade with a hidden key compartment inside. It looks like a whimsical shelf piece and works as a discreet spare key spot.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 04 Hours 11 Minutes* - 101 g of filament (may vary according to your printer model)
- Multicolor - 10 Hours 40 Minutes* - 197 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 03 colors)
- Multipart - 04 Hours 43 Minutes* - 104 g of filament (may vary according to your printer model)
- Approximately Height: 17 x 10 x 05 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 20 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (normal (manual)).
- Build Plate Adhesion: Yes (mouse ear brim).
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
