3D MODEL DESCRIPTION
A photo frame shaped like a sealed envelope with a wax stamp, perfect for romantic or sentimental displays. Every memory deserves a stamp of approval.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Desk- 02 Hours, 04 Minutes* (may vary according to your printer model)
Multiparts Desk- 02 Hour, 12 Minutes* (may vary according to your printer model)
Multicolor Desk- 11 Hours, 57 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Monocolor Magnetic- 01 Hour, 52 Minutes* (may vary according to your printer model)
Multiparts Magnetic- 02 Hours, 02 Minutes* (may vary according to your printer model)
Multicolor Magnetic- 11 Hours, 46 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height: 10 x 02 x 07 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You Will Need: Neodymium 5x2 - 2x - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Manual Brim)
- Others: You can use a more optimized print profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!