3D MODEL DESCRIPTION
As a child, Janine always dreamt about being a mermaid. The closest she could get was becoming a scuba diver. Surely not the same, but it’s still pretty cool!
Our scuba divers are all pretty simple prints, support free, and you can even make them multicolor! No troubles here, just smooth diving.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 16 Hours 52 Minutes
- Approximately Dimensions : 15 cm x 8 cm x 11 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!