3D MODEL DESCRIPTION
Visit the school of wizardry of Alastor, the Scholar’s Tower, and discover all its secret wonders. When walls are this old and secrets are this deep, each room tells a different story. It falls upon you to decide which ones.
3D PRINT FILE SETTINGS
Recommended for FDM and Resin Printers
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Brim.
- All other settings must follow your (3D Printer) recommendations!
Pre-Supported: Standard STL file version includes all supports (pre-supported).
Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
Hollow Model: You must add your own supports.
Happy Printing!