3D MODEL DESCRIPTION
This little penguin comes dressed for winter and ready to waddle out of any gacha capsule. Articulated, collectible, and too cute to leave on the print bed.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours 06 Minutes* (may vary according to your printer model)
Multicolor - 18 Hours 00 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Filament consumption: Monocolor - 5.83 grams (may vary according to your printer model)
Multicolor - 263.58 grams (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 4 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Filament consumption is an estimate and may vary depending on your settings.
YOU WILL NEED:
Split Key Ring with Chain - Amazon - AliExpress - Mercado Livre
Ring Conector 12 mm - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. Ear brim.
- Top surface pattern: Concentric.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!