3D MODEL DESCRIPTION
A magical little egg covered in playful scales. Crack it open and hide a tiny treasure inside. Perfect for anyone who likes their Easter with a hint of fantasy.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 57 Minutes* (may vary according to your printer model)
Multiparts - 04 Hours 19 Minutes* (may vary according to your printer model)
Multicolor - 11 Hours 42 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 17,5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Inner Brim) only on “top part”.
- Others: You can use "concentric" top surface pattern in the "top part", and in the "ear multipart" set layer high 0,12mm to improve finish quality.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!