3D MODEL DESCRIPTION
Even Santa needs to warm up! This lamp captures the cozy glow of a festive bonfire, perfect for lighting up your holiday evenings.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 07 Minutes* (may vary according to you printer model)
Multiparts - 09 Hours 05 Minutes* (may vary according to you printer model)
Multicolor - 23 Hours 09 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 11 cm
Led Candle - Amazon Mercado Livre Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5%
- Build Plate Adhesion: Brim (only for small pieces).
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
