3D MODEL DESCRIPTION
His heirloom is safely protected now.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: AirTag 1 Hours, 45 Minutes (will vary accord to you printer
model)
SmartTag 2 Hours, 06 Minutes (will vary accord to you printer
model) - Approximately Height: 2,4 cm
**SUGGESTION LINKS**
You Will Need To:
Nylon Watch Strap
Aliexpress Amazon Mercado Livre
Apple Watch Strap (Any model for Apple Watch 40mm)
Aliexpress Amazon Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
