3D MODEL DESCRIPTION
Iron cage. Bone jaw. Bad attitude. It makes every word you say sound like a threat.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Large - 04 Hours, 47 Minutes* (may vary according to your printer model)
Multiparts Large - 04 Hours, 42 Minutes* (may vary according to your printer model)
Multicolor Large - 23 Hours, 28 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 16 x 12 x 14 cm (Large Type)
- 3D Printing Time: Monocolor Medium - 04 Hours, 26 Minutes* (may vary according to your printer model)
Multiparts Medium - 04 Hours, 22 Minutes* (may vary according to your printer model)
Multicolor Medium - 22 Hours, 11 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height: 15 x 12 x 13 cm (Medium Type)
3D Printing Time: Monocolor Small - 04 Hours, 06 Minutes* (may vary according to your printer model)
Multiparts Small - 04 Hours, 03 Minutes* (may vary according to your printer model)
Multicolor Small - 20 Hours, 25 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 14 x 11 x 12 cm (Small Type)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You will need a cloth strip, elastic band, leather strap, or whatever you find more comfortable to secure your mask. The measurements should be 05 x 01 cm, or if you prefer, you can use a ruler to measure the opening more accurately.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, only on parts with low adhesion on the print bed.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!