Rottenflurry

3D MODEL DESCRIPTION

We know easter is not that happy for everyone. Some can't even stand the sight of all those little happy easter bunnies running everywhere. That's why we knew that Honeybun would not be friends with everyone. But what happens when Honeybun crosses one of our zombie delivery guys rushing to get all easter eggs around? Meet ROTTENFLURRY, Honeybun's zombie, half decomposed brother. Bitten by a zombie and transformed, he will still deliver your chocolates, but you may need to clean them a bit from brains, flesh and blood.

This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 16 Hours 53 Minutes (will vary accord to you printer model)

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!