A decaying visage crawling with maggots, where death refuses to stay buried.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Large - 11 Hours, 31 Minutes* (may vary according to you printer model)
Monocolor Medium - 10 Hours, 56 Minutes* (may vary according to you printer model)
Monocolor Small - 09 Hours, 44 Minutes* (may vary according to you printer model)
Multipart Large - 11 Hours, 23 Minutes* (may vary according to you printer model)
Multipart Medium - 07 Hours, 23 Minutes* (may vary according to you printer model)
Multipart Small - 06 Hours, 03 Minutes* (may vary according to you printer model)
Multicolor Large - 23 Hours, 45 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
Multicolor Medium - 22 Hours, 35 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
Multicolor Small - 21 Hours, 26 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 22 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You will need a rope, ribbon, or elastic band of your choice to secure it to your head. More information in the "How to" videos.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 03% (Grid).
- Needs Support: Yes, (Tree Type) except in “Worms” files.
- Build Plate Adhesion: Yes. (Brim Type) except in “Worms” files.
- Others: For this model, we suggest you use a lighter slicing profile to prevent the “Mask” from becoming too heavy.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!