3D MODEL DESCRIPTION
A roly-poly Christmas tree with a kawaii face that wobbles without ever falling. Cute as a holiday decoration and fun enough to actually play with.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 02 Hours 38 Minutes* - 73 g of filament (may vary according to your printer model)
- Multicolor - 04 Hours 31 Minutes* - 104 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 03 colors)
- Multipart - 02 Hours 46 Minutes* - 73 g of filament (may vary according to your printer model)
- Approximately Height: 9,5 x 6,5 x 6,5 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 200–300 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 1% (concentric)
- Needs Support: No.
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: -Top surface pattern: Concentric; -Internal solid infill pattern: Concentric; -Infill: 2%; -For the "Down" part, use 100% infill.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
