3D MODEL DESCRIPTION
Shining a chic glow on your table.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: Top 9 Hours, 27 Minutes, Base 22 Hours, 30 Minutes, All Lid 4 Hours, 45 Minutes (will vary accord to you printer model)
- Approximately Height: 32 cm
WHAT YOU WILL NEED: AliExpress
- Lamp Holder Energy: (Socket)
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- TOP
- Nozzle: 0.4 mm
- Line Width: 0.6 mm
- Average Speed: 20mm/s (First Layer) / 20mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: Vase Mode (1 Perimeter).
- Needs Support: No.
- Build Plate Adhesion: Skirt.
- Base and Lid
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!