3D MODEL DESCRIPTION
A wall clock that pulls double duty as a music statement. It keeps perfect time and makes every room feel like a backstage lounge.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 10 Minutes* (may vary according to your printer model)
Multiparts - 09 Hours 44 Minutes* (may vary according to your printer model)
Multicolor - 16 Hours 34 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 4 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Will Need: Wall Clock Mechanism - Amazon - AliExpress - Mercado Livre
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Yes. Outer brim only.
- Others: Purge Tower: Filling gap,100%. Disable rib wall
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!