3D MODEL DESCRIPTION
Even though it’s already sliced, you’ll need to slice it again.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 4 Days, 4 Hours, 49 Minutes (will vary accord to you printer model)
- Approximately Height: 18 cm
- Attention: from “rest in pieces bottom N°1” to “rest in pieces N°8” files, you need remove all top layers
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): from “rest in pieces bottom-N°1” to “rest in pieces N°8” files, you need to use 99% (Lighting) except in “stem” and “top-9” files, you need use 10% (Gyroide)
- Needs Support: Yes (Tree)
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!