3D MODEL DESCRIPTION
A compact disc launcher with an assertive profile and a large loading area that makes reloading fast and clean. Built for those who want precision and control in one package.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 05 Hours 07 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 17 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You Will Need: Elastic Bands 2x - AliExpress - Amazon - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No, but you can use “Manual Support” if your profile isn't calibrated to create a uniform “Bridge.”
- Build Plate Adhesion: No, but you can use “Painted Brim” if your board has poor grip.
- Others: If you prefer, use the “Concentric” bottom and top layer style to create a more distinctive finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!