3D MODEL DESCRIPTION
Raised in the shadows of crowded streets and dungeon corridors alike, this rogue thrives where others lose their footing. Locks click open. Purses grow lighter.
Rat Rogue-75mm-FDM
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Hours, 35 Minutes* (may vary according to your printer model)
Multicolor - 06 Hours, 07 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 7,5 cm
Rat Rogue-40mm-FDM
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours, 09 Minutes* (may vary according to your printer model)
Multicolor - 02 Hours, 56 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Approximately Height: 04 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This file does not require super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Grid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: It is possible to use a more optimized profile, provided you adhere to the structural parameters we recommend.
Rat Rogue-SLA
3D PRINT FILE SETTINGS
- Pre-Supported: Standard STL file version includes all supports (pre-supported).
- Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
Hollow Model: You must add your own supports.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!