3D MODEL DESCRIPTION
Take a rain check on watering your plants and let this lovely cloud do it for you! This plant waterer can be printed in multicolor on the first layer even if you don’t have a multicolor printer, and it has a super simple assembly. Just glue the front part onto the rest of the cloud, place some cotton inside and when you pour, it’ll rain.
Instructions for printing your Rain Cloud with multiple colors on a monocolor printer:
*Disclaimer: Make sure your printer has the firmware updated for the use of M600 code. These instructions work for prusa slicer only*
PLEASE FOLLOW THE INSTRUCTIONS ON *README*
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 13 Hours and 31 Minutes
- Approximately Length : 15 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: 8 lines of Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!