3D MODEL DESCRIPTION
Hummingbirds are delicate little creatures. Especially the quilted 3D printed ones. So precious.
This hummingbird is a simple puzzle that fits two different frames - you can choose which one you prefer, both go on the wall. It’s super simple to print, needs no supports and the assembly is the puzzle itself.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 07 Hours 46 Minutes
- Approximately Length: 19,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!