Quill Pen

3D MODEL DESCRIPTION
 

And speaking of vintage stuff, how about the classic ones? You've seen a quill pen in movies as a child and always wanted one, I bet! Now you can have it.

Note: We recommend print the feather in a resin printer, but if you feel like a master printer on FDM you can always try to print the feather with filament.

• 3D Printing Time (FDM) : Monocolor - 04 Hours 12 Minutes*  (may vary according to your printer model)
                                

*Note: Printing time based on a Bambu P1s printer, according to our tests.

You Will Need: BIC Ballpoint Pen (You will only use the Pen Refill) - Mercado Livre | Amazon 

 

3D PRINT FILE SETTINGS FOR FDM (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.12 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Grid)
• Needs Support: No.
• Build Plate Adhesion: Yes, only for the feather.
• Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!