3D MODEL DESCRIPTION
It’s all fun and games until someone beats you at your favorite sports match. Better keep practicing! This support free model is a mini game where you throw the ball and try to score the highest points. Trust us: hitting the hoop is harder than printing it.
Our Quarterback Ball Thrower requires some simple assembly, so follow these instructions:
Put Quarterback_Thrower-Left_Body and Quarterback_Thrower-Right_Body together then fit Quarterback_Thrower-Right_Arm up to the spring inside the Quarterback_Thrower-Left_Body.
Fit Quarterback_Thrower-Left_Arm and Quarterback_Thrower-Head onto the body.
Place the whole body onto the Quarterback_Thrower-Base
Piece together the both sides of the ball, place it on the Quarterback’s hand and it’s ready to launch!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Days 11 Hours 22 Minutes
- Approximately Height: Quarterback - 18 cm
Target Stand - 19 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!