3D MODEL DESCRIPTION
Love is like a puzzle, sometimes it’s too hard to understand.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 22 Hours, 47 Minutes (will vary accord to you printer model)
- Approximately Height: 12 cm
What You’ll need:
Neodymium Magnetic Size 5x1mm. Quantity: 32
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
