3D MODEL DESCRIPTION
For you who’s a control freak, but usually had problems controlling your own yarn ball.
This kit contains a yarn bowl and a hook case, which supports hooks from 3 to 9mm. Just switch the adapter inside the case to the hook size you’re using!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: Bowl 1 Days, 8 Hours, 9 Minutes, Support Hook 4 Hours, 45 Minutes (will vary accord to you printer model)
- Approximately Height: Bowl 10 cm, Support 15,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Only Bowl)
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!