3D MODEL DESCRIPTION
A flower pot that keeps its best secret inside. Hang your keys and watch who pops up to greet you.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Hours 47 Minutes* (may vary according to your printer model)
Multiparts - 02 Hours 44 Minutes* (may vary according to your printer model)
Multicolor - 18 Hours 29 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height (assembled): 11 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Only in parts with small adhesion.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
