3D MODEL DESCRIPTION
Press the button and watch it move! Whether it’s holiday season or not, this reindeer is always ready to prance!
Liked what you see? This model was designed by @angeljacobofigueroa
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 07 Hours 38 Minutes (will vary accord to you printer model)
- Approximately Height: 15 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
