3D MODEL DESCRIPTION
This giant gold pile is nothing compared to the pile of tension you’re building with this.
- This STL file is recommended for FDM Printers and Resin Printers!
- 3D Printing Time Based on Ender 3: 04 Days 07 Hours 38 Minutes (will vary accord to you printer model)
- Approximately Height: 12,7 cm
3D PRINT ASSEMBLY
- You will need one 50 mm rubber band.
- You will need twenty 10 mm rubber band.
- You will need four screws M3-15mm.
- If you aren’t playing the game, don’t store coins in the slots!!
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!