3D MODEL DESCRIPTION
Three clicker gift boxes, each hiding a different character inside. One press and the lid pops open to reveal who's inside, one more and it snaps shut again.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 02 Hours 02 Minutes* - 24 g of filament (may vary according to your printer model)
- Multicolor - 14 Hours 05 Minutes* - 193 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 07 colors)
- Approximately Height: 4,3 x 3,3 x 3 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
YOU WILL NEED:
Outemu Blue mechanical keyboard switch Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 200–300 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes (normal (manual)).
- Build Plate Adhesion: Yes (auto brim).
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
