3D MODEL DESCRIPTION
A spinner with pop-it domes on every arm. Two fidget sensations in one printable piece.
- This STL file is recommended for FDM MULTIMATERIAL!
Multi-material is the printing process that uses two or more different materials; in this model, TPU 95A and PLA are used.
- 3D Printing Time:
- Multimaterial - 01 Hours 17 Minutes* (May vary depending on your printer model and the number of colors in your AMS; in this print, we used 01 colors in PLA and 01 colors in TPU)
- Approximately Height: 8 cm
*Nota: Printing time based on a SnapMaker U1 printer, according to our tests.
ATTENTION: Parts to be printed in TPU are indicated in the file name.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Manual Normal Support in PLA. Only in the 3 "TPU_PopIt" files.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!