3D MODEL DESCRIPTION
Dive into the fun again. Parties should never end!!!
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 09 Minutes* (may vary according to you printer model)
Multicolor - 18 Hours 41 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 6 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Time considering only the "useful model", without the head.
ATTENTION: files requires super glue to assemble.
Attention BambuLab users: for the “pool” file, use the custom settings described under “other”. If you have any questions, check out the “how to slice” video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree), only in the “stair” file.
- Build Plate Adhesion: No.
- Others: Enable the “Height range Modifier” and set the following settings.
Height range: 0 to 17 mm
Inner wall speed: 80 mm/s
Small perimeters speed: 30 mm/s
Sparse infill speed: 80 mm/s
Internal solid infill speed: 80 mm/s
Top surface speed: 100 mm/s
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
