Polar Bear

3D MODEL DESCRIPTION
 

Polar bears are the official experts on displaying memories of winter evenings, wouldn’t you agree?

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 09 Hours 29 Minutes*  (may vary according to you printer model)
                                Multicolor - 01 Day, 08 Hours 55 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
• Approximately Height: 21 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

ATTENTION: This files requires super glue. You will need a cable with a plug that is compatible with your region. You can weld the cables or simply insulate them with electrical tape.

You Will Need: LED Lights

On-Off Switch (15mm x 10mm)

Electrical Plug (2.1mm DC Jack 12V)

Power Supply (12V, 1A, 12W)

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.
• Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!