3D MODEL DESCRIPTION
The last thing you need is a curveball like your controller slipping off the couch. (Detachable ball, so you can fit your own baseball!)
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 02 Days, 7 Hours, 42 Minutes (will vary accord to you printer model)
- Approximately Height: 19 cm
- This model fits both controllers types (PS5 and XBOX).
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim (Only at the “ball” file.)
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!