Pit Stop Tires Controller Holder

3D MODEL DESCRIPTION
 

Hope you're not tired yet. (Detachable tires, so you can combine different colors or even attach more than one holder!) 
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: PS5: 17 Hours, 54 Minutes (will vary accord to you printer model)
                                                            XBOX: 17 Hours, 59 Minutes (will vary accord to you printer model)
• Approximately Height: 6 cm
   

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.16 mm
• Recommended Layer Height:  0.16 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: Yes. (tree slim) only “rim” file
• Build Plate Adhesion: None.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!