3D MODEL DESCRIPTION
Your headphones deserve a throne. A skull clutching a piston keeps them in pole position, ready for your next ride.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day, 01 Hours, 53 Minutes (will vary accord to you printer model)
- Attention in this Assembly: Do not change the recommended profiles in the "PDF" if you use "Silk" filament.
- Approximate Measurements: Mais Version 09 x 09 x 28 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Grid) if your printer is not well adjusted to make “bridges” and “overhangs”.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
