Pisces Charm

3D MODEL DESCRIPTION
 

Soft, dreamy, and probably somewhere else right now.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 02 Hours 05 Minutes*  (may vary according to your printer model)
                                Multicolor - 07 Hours 40 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
• Approximately Height: 2 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
                          Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.12 mm
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.
• Others: 
  • Pisces Charm
    • Top surface pattern: Concentric
  • Base
    • Top surface pattern: Monotonic
  • Stitching position: Aligned. Disable smart scarf stitching application.
  • Line width, initial layer: 0,4mm

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!